RV - TC Roof Sandwich Panels
Product Description
Main Parameters
| Wire Channel Embeded Roof Structural Composite Sandwich panels | |||
| 1. Instruction of the Structural Composite Sandwich panels | |||
| Structural Composite Sandwich panels is an insulation and freezing box set with high consisting prefabricated elements made by high-quality Fiber Glass materials from German LAMILUX and Best Glue from German KOMMERLING, And the PU foam adopt from the Germany brand PUREN, Assembled with high-strength fiber glass Profile for fast and easy box installation. | |||
| 2. General Of the Structural Composite Sandwich panels | |||
| Max. Length of the Panel Kits | 14750mm | ||
| Max Wideth of the panel Kits | 3200mm | ||
| Thickness of the Panel Kits | 50,,83.5,105,mm135mm | ||
| Pre-Embeded for Wire Arrangements | PVC Tube Embeded in the interior side of the panels for RV electric Wire pavements | ||
| Tensile strength | >180MPa | ||
| Flexural strength | >220MPa | ||
| Barcol hardness | 24.6MPa | ||
3. Super Structure
Structural Composite Sandwich panels is self Supporting Struture , without any Metal .Side Edge Open Structure, Embedded FRP Suqare Tube as the strengthen bone, and every layer can be choosed for different usagae of the walls.
Charactors:
Without metal carrier elements = without direct heat conductivity
FRP Embeded Tube = Same MAterial
Different FRP skin for specail Demands of Truck bodies like Medicines etc.
Opened Edge can easy change the design of the box for doors and holes,especial for Caravan box and Truck Camper.
Side Elevation
Front Elevation
Top Elevation
4.Description of material
| FRP can let the body get a good insulation function and light dead weight, we also Using an adhesive joining process with LAMILUX to employ the fiberglass sheets to construct boxes with completely vapour diffusion-tight surfaces to get better insulation and balance temperature inside. | |||
| Core Thermal Polyrethane Foam All panels, Floor & Roof of the box will be insulated with POLYURETHANE foam (PU) of density 40KG~45/M3, which can carry the Thermal Conductivity value 0.3kcal/M3. | |||
| KOMMERLING Two component reaction adhesive | |||
| Model Values | LAMILUX High Impact | LAMILUX Woven Fabric Gelcoat | LAMILUX High Gloss 4000 |
| Thickness | 1.4 mm | 2.0 mm | 1.7mm |
| Weight | 2250 g/㎡ | 2650 g/m2 | 2340 g/㎡ |
| Glass content | 48-52 % | 27-29 % | 20-24% |
| Flexural strength | 305 N/m㎡ | 170N/mm | 100 N/m㎡ |
| Flexural emodulus | 8550 N/m㎡ | 11700 N/mm2 | 4000N/m㎡ |
| Tensile strength | 240 N/m㎡ | 80 N/mm | 55 N/m㎡ |
| Tensile emodulus | 14700 N/m㎡ | 8100 /mm2 | 6000 N/m㎡ |
| Impact strength | 82 KJ/㎡ | ||
| Advantage of LAMILUX panel | Benefit | ||
| 1. Computer manufacturing process VS hand layup | High impact resistance | ||
| 2. Fiber reinforce plastic VS metal panel | Better heat insulation | ||
| 3. Constant gloss level | Good surface aspect | ||
| 4. Very consistent gelcoat-thicknesses | No cracks | ||
| 5. FRP-sheets lie flat | No curl | ||
| 6. Less translucency for sunlight and also UV-light | No color variation | ||
| 7. Anti slip-PES floor | Abrasion resistance | ||
| 8. TUV &ATP certificate | High quality and Food safety | ||
LamiLux High Glossy FRP
LamiLux High Impact FRP
LamiLux Super Plus FRP
LamiLux Gewebe Plus FRP
FRP Structural Composite Sandwich panels + FRP Extrusion Finished RV Truck Camper Box
Front Side Elevation
Door Side Elevation
Windows Side Elevation
Side Elevation
FRP Modular Composite Sandwich Panel Finished Expedition Box
Driver Side Elevation
Front Side Elevation
Rear Side Elevation
Entry Door Side Elecation
5. The main characters
| Advantages | |||
| 1. Completely vapor diffusion-tight surfaces of FRP to get better insulation and balance temperature inside. 2. Non-Pollution and Special Function Box. German Original FRP of Lamilux can satisfied not only the best Mirror surface, but also can meet all the special requirements with their TUV certified AntiBac Panel, Anti-UV Panel, HACCP certified Panel. High Impact panel, Flex Gewebe Panel etc. 3. Best Materials to keep good insulation function and light for more capacity. The best Structure Material of FRP and Glue can let us cut the other embedded wood beams to reduce more than 20% of weight than the normal Sandwich panels. 4. Quick installation with Special Designed Fiber Glass Profile. With our patented FRP Profiles, we can assembly one box in one hours with 3 workers to save 80% of Labor cost. 5. Rapid order processing for all Size and shaped box (standard solutions can be delivered at short notice). With the Biggest Carve Machine in China, we can supply all different size and shapes Panels to fit for all the chassis of the world. 6. It is suitable for all vehicle brands and models. 7. Easy Repair with our 7*24 hours Service support. | |||
| Fault: 1) Open Edge let the Foam Oxidized a little quick than our FRP-Pie Panels 2) Side Edge Layer have the risk of Tearing. 3) Open Edge structure need super Composite Glues and Materials cause cost high |
6. Box Installation Process
| Sandwich panel box is a pre-installed trailer box body which can be mounted directly onto the chassis of the vehicle using its lower fixed frame. It is important that all specifications and guidelines from the chassis manufacturer be observed during assembly. Requirements for installation: Crane or alternative lifting equipment Standard assembly tools, i.e. pneumatic screwdriver, wrenches, etc. FERROPLAST KIT: Prepare the chassis Mount the partial frame and the floor plate on the chassis Mount the side, front and rear walls and the roof Install the required options Finishing FERROPLAST BOX: Prepare the chassis Mount the BOX together with sub frames on the chassis Install the required options Finishing |
1. Floor-Front Wall
2. Side Walls adhesive
3. Roof Adhesive
4. Amount to Truck
Brief Instruction
GET.6EXP.
LIGHT AND STRONGER MODULAR BOX
BY TRAILERBULL
TRAILERBULL engineered expedition box types are available to accommodate your ideas about Expedition Vehicles. Though the basic needs of globetrotters are much the same, their demands on the vehicle itself differ lone traveler, twosome, family, class of driving license, destination, infrastructure, terrain, duration of the journey … All these criteria ultimately determine the optimum vehicle and the suitable chassis.
GET.6EXP can translates these criteria into 3 Expedition box models geared to these different requirements thanks to our durable GRP Sandwich panel composite technology offers top performing strength.
TRAILERBULL With different wall panels (FRP-Pie Modular Panel, FRP-Plast Sandwich Panel) to meet all the popular chassis and requirements in the world and already have proven themselves on the actual journeys of many satisfied customers.
GET.6EXP can translates these criteria into 3 Expedition box models geared to these different requirements thanks to our durable GRP Sandwich panel composite technology offers top performing strength.
TRAILERBULL With different wall panels (FRP-Pie Modular Panel, FRP-Plast Sandwich Panel) to meet all the popular chassis and requirements in the world and already have proven themselves on the actual journeys of many satisfied customers.
FAQ
-Can you pre-cut openings for windows and doors?
We can offer this service with cost as we have embeded strengthen parts inside, but that will be confirmed before producing. your own Openings can easily be cut with a jigsaw and plastic rated blade, but the embeded strengthen parts can not make . So if it willl work in really bad expedition, you'd better let us pre-cut opennings for windows and doors.
Can you do departure angles?
Yes, we have two size of the box shape, one is the standard square shape , the other is the departure angle design. Please mark the desired angle (including dimensions) in the quoting template if you need.
-Can you design subframes?
We have the service of this, but you need supply the full chassis layout to us in advance.
-Can I use different windows and doors than what’s listed on your specification?
Yes. However, we highly recommend our windows and doors as they work in perfect balance with our camper bodies.
–Can I order a camper body with an alcove?
Yes. Please ask us for our alcove quoting template.
–What’s included in the shipment?
1. CKD type with All panels cut to size (other than departure angle),
2. CBU type with assembled box per your requirements.
–Can you help with the interior layout?
No. We are solely a camper body supplier, not a full scale outfitter/design office.