CNG Tube Skid semi-trailers
Product Parameters
CNG Tube Skid semi-trailers | 9122GGQ12 | |
overall dimension of the vehicle(mm) | Length | 7196 |
Width | 2480 | |
Height (unload) | 3535 | |
Overall dimension of CNG Tube SKID(mm) | Length | 5400 |
Dia Φ | 559 | |
Quantity | 12 tubes | |
Thickness | 16.5mm | |
capacity(L) | 12600 | |
GVW(kg) | 25450 | |
vehicle total weight(kg) | 23170 | |
rated payload(kg) | 2280 | |
Wheel base(mm) | 4250+1300 | |
Tread(mm) | Tread at front | |
Tread at rear | 1840/1840 | |
Front/Rear Overhang(mm) | /1046 | |
Approach/Departure angle(°) | /31 | |
Rated payload of Vehicle saddle | 16000 | |
Axle | BPW 12T*2 | |
Axle Capacity kgs | 8000/8000 | |
Tyres | 12R22.5*8 | |
Tank Material | 4130X | |
Transport Material : | CNG -189.95KG/CBM | |
Insulated Cover | ||
Suspension | Spring Leaf | |
Leaf Spring | /7/7 | |
remark: |
Main Instruction
We not only in the normal Carbon Steel and Aluminum tank , but also specializes in design, manufacturing, sales and technical service of various cryogenic equipments, including Cryogenic Liquid Storage Tank, Cryogenic Liquid Lorry Tanker, Large Pressure Tank, Liquid Tank Container, Cryogenic Thermal-insulating Cylinder, Vaporizer, Hazardous chemical storing and transporting equipments. We also gets involved in establishment of LNG applied projects and industrial gas applied projects.
Thermal-insulating mode:Super vacuum multi-layer insulation
Capacity:5M3-36M3
Working Pressure:0.3MPa-1.6MPa
Medium:LOX、LIN、LAr、LCO2、LC2 H 4、LH2 etc
Features:For material, we raise products efficiency with use of new material-the high strength stainless steel. We realize the maximum capacity among similar products, lower self-weight of vehicle as well as lower operation cost.
Steel Structure
Material: High strength low alloy steel with 350 MPa yield strength is used for welded I-beam and 235 MPa in other fabricated parts.
Main Beams: 500m deep x 146mm wide x 8mm web welded I-section main beams,Top Flange 14m thick, Bottom Flange 16m thick.