LH2 Tube Skid Semi-trailers with 8 Tubes And 2 Axles for 20000L CNG,CNG Tube Skid Tanker
Product Parameters
LH2 Tube Skid semi-trailers with 8 tubes and 2 axles for 20000L CNG,CNG Tube Skid Tanker
LH2 Tube Skid semi-trailers with 8 tubes and 2 axles for 20000L CNG | 9202GGQ08 | ||
overall dimension of the vehicle(mm) | Length | 12958 | |
Width | 2480 | ||
Height (unload) | 2700 | ||
Overall dimension of CNG Tube SKID(mm) | Length | 12190 | |
Dia Φ | 559 | ||
Quantity | 8 tubes | ||
Thickness | 35mm | ||
capacity(L) | 20640 | ||
GVW(kg) | 35000 | ||
vehicle total weight(kg) | 31295 | ||
rated payload(kg) | 3705 | ||
Wheel base(mm) | 9100+1300 | ||
Tread(mm) | Tread at front | ||
Tread at rear | 1840/1840 | ||
Front/Rear Overhang(mm) | /1593 | ||
Approach/Departure angle(°) | /19 | ||
Rated payload of Vehicle saddle | 17000 | ||
Axle | BPW 12T*2 | ||
Axle Capacity kgs | 9000/9000 | ||
Tyres | 12R22.5*8 | ||
Tank Material | 4130X | ||
Transport Material : | CNG -180.8KG/CBM | ||
Insulated Cover | |||
Suspension | Spring Leaf | ||
Leaf Spring | /7/7 | ||
remark: | |||
Main Instruction We not only in the normal Carbon Steel and Aluminum tank , but also specializes in design, manufacturing, sales and technical service of various cryogenic equipments, including Cryogenic Liquid Storage Tank, Cryogenic Liquid Lorry Tanker, Large Pressure Tank, Liquid Tank Container, Cryogenic Thermal-insulating Cylinder, Vaporizer, Hazardous chemical storing and transporting equipments. We also gets involved in establishment of LNG applied projects and industrial gas applied projects. Thermal-insulating mode:Super vacuum multi-layer insulation Capacity:5M3-36M3 Working Pressure:0.3MPa-1.6MPa Medium:LOX、LIN、LAr、LCO2、LC2 H 4、LH2 etc Features:For material, we raise products efficiency with use of new material-the high strength stainless steel. We realize the maximum capacity among similar products, lower self-weight of vehicle as well as lower operation cost. | |||
Steel Structure: Material:High strength low alloy steel with 350 MPa yield strength is used for welded I-beam and 235 MPa in other fabricated parts. Main Beams: 500m deep x 146mm wide x 8mm web welded I-section main beams,Top Flange 14m thick, Bottom Flange 16m thick. | |||
OEM Parts Configuration: King Pin: 3.5” /2” exchangeable king pin, Supplier: JOST. Container locks: 12 Sets or 8 sets. Landing Gear: 2 speed road side winding with sand shoe,Type: JOST C200T. Suspension:Mechanical suspension with 11 / 10/ 8/7 leaf spring (W100mm x T12mm per leaf). options: Bogie Suspension, Air Spring Suspension Axles: square axle with 12 tons capacity. Supplier & type: BPW/ FUWA/SAF/L1. Made in China.. Rims: 10 Holes ISO. Made in China. Option By the Factory.. Tires: 11R22.5 OPTIONS: 12R22.5, 315/80R22.5,385/65R22.5 , Triangle Brand , Made in China. Option By the Factory.. Brake System: Dual air brake system, Wabco relay emergency valve, OPTIONS: ABS. Option By the Factory. Brake Chamber: 30 type on front axle.30/30 type on other axles, Electrical System: Complete 24V installation with modular wiring harness. 7 pole plug placed at front in accordance to ISO, norms NO.1185. Side Lights: reflectors (orange); Rear Lights: direction indicators (orange) /brakes (red)/rear warning (white). |