40ft Insulated Box Semi Trailer with 3 Axles for Food And Temperature Sensitive Cargos , Insulated Semi Trailer
Product Parameters
40ft Insulated Box semi Trailer with 3 axles for food and temperature sensitive cargos
Refrigerator trailers are box trailers with a heating/cooling unit (reefer) attached insulated walls, used for hauling produce, frozen foods, meat, flowers, etc. No quite as common but they are also produced in tautliner models with thicker curtains to sustain the fluctuating temperatures.
Most of the long-distance refrigerated transport by truck is done in articulated trucks pulling refrigerated semi-trailers. Research is done on fuel cell auxiliary power units.
40ft Insulated Box semi Trailer with 3 axles for food and temperature sensitive cargos | 9303XBW | ||
Outside dimension of truck mm | Length | 13000 | |
width | 2550 | ||
height(unload) | 3990 | ||
Dimension of van body mm | length | 12740 | |
width | 2350 | ||
height | 2470 | ||
G.V.W kgs | 43350 | ||
Vehicle total weight kgs | 13350 | ||
Rated payload kgs | 30000 | ||
front/rear Overhang(mm) | /2480 | ||
Approach angle/departure angle(°) | /14 | ||
max. vehicle saddle payload kgs | 14930 | ||
tyre | 11R22.5*12 | ||
Axle | BPW 12T*3 | ||
Wheelbase (mm) | 6830+1310+1310 | ||
Tread:mm | Tread at front | ||
Tread at rear | 1840 | ||
Min. Temperature ℃ | |||
All-close panels produced with German Technology and Machines, adhesive structure with the type of building block, Freon-free polyurethane vesicant material is our innovation,which are very different from traditional open sandwich panel with connect by metals, injected polyurethane at site with Freon.Our surfaces of panels are FRP, the middle with PU foam sheet, The Both surface FRP is connected by FRP stiffener to the whole, During producing, the E-glass fiber, UPR(unsaturated polyester ester resins) and fluorine-free PU foam structured together after heating and pressing , which also makes a layer of UV protection, waterproof, anti-aging, Anti-corrosion in the outer side surface of the panels at the same time. The main characters are as follows: 1. Light in weight:40% lighter than metal body. 2. Better insulation: K value less than 0.3w/sqm*k. 3. High in strength and long life: 5 times longer than metal body. 4. Non-corrosion, non-pollution, anti-brine, acid and soda-resisting. 5. Easy to assembly and repair at site. It is also very easy to assemble our insulated bodies, because applying polyurethane adhesive to the joint area of the all-closed sandwich panels, which ensures the joint reliability and optimum insulation, forms them. All bodies CKD we provide have included all necessary accessories such as aluminum angles, aluminum corner, sealing glues, screws, side guards, etc. Therefore, you can assemble them by yourself without purchasing any material. Generally, 3-4 workers can assemble 5-6 bodies everyday. Moreover, at the beginning we will assign our engineers to supply you some technical guidance. | |||
Panel Thickness | Side Panel | Top/Floor Panel | Front/rear Panel |
General body | 82mm | 105mm/105mm | 82mm/82mm |
Ice cream body | 105mm | 125mm/125mm | 105mm/82mm |
Steel Structure: Material:High strength low alloy steel with 350 MPa yield strength is used for welded I-beam and 235 MPa in other fabricated parts. | |||
OEM Parts Configuration: King Pin: 3.5” /2” exchangeable king pin, Supplier: JOST. Landing Gear: 2 speed road side winding with sand shoe,Type: JOST C200T. Suspension:Mechanical suspension with 11/10/8/7 leaf spring (W100mm x T12mm per leaf). options: Bogie Suspension, Air Spring Suspension Axles: square axle with 12 tons capacity. Supplier & type: BPW/ FUWA/SAF/L1. Rims: 10 Holes ISO. Made in China. Option By the Factory.. Tires: 11R22.5 OPTIONS: 12R22.5, 315/80R22.5,385/65R22.5 , options: Michelin,Firestone, Double Coin Brake System: Dual air brake system, Wabco relay emergency valve, OPTIONS: ABS. Brake Chamber: 30 type on front axle.30/30 type on other axles, Electrical System: Complete 24V installation with modular wiring harness. 7 pole plug placed at front in accordance to ISO, norms NO.1185. | |||
Others: Spare Tire Carrier: Equipped two sets per chassis without spare tire. Side Guard: Steel. Tool Box: Equipped one set. Painting: Color by customer’s requirement. Marking: By customer’s requirement. Options: Oil Tanker: 300L carbon steel. |
Main Character
All-close panels produced with German Technology and Machines, adhesive structure with the type of building block, Freon-free polyurethane vesicant material is our innovation,which are very different from traditional open sandwich panel with connect by metals, injected polyurethane at site with Freon.Our surfaces of panels are FRP, the middle with PU foam sheet, The Both surface FRP is connected by FRP stiffener to the whole, During producing, the E-glass fiber, UPR(unsaturated polyester ester resins) and fluorine-free PU foam structured together after heating and pressing , which also makes a layer of UV protection, waterproof, anti-aging, Anti-corrosion in the outer side surface of the panels at the same time.
The main characters are as follows:
1. Light in weight:40% lighter than metal body.
2. Better insulation: K value less than 0.3w/sqm*k.
3. High in strength and long life: 5 times longer than metal body.
4. Non-corrosion, non-pollution, anti-brine, acid and soda-resisting.
5. Easy to assembly and repair at site.
It is also very easy to assemble our insulated bodies, because applying polyurethane adhesive to the joint area of the all-closed sandwich panels, which ensures the joint reliability and optimum insulation, forms them. All bodies CKD we provide have included all necessary accessories such as aluminum angles, aluminum corner, sealing glues, screws, side guards, etc. Therefore, you can assemble them by yourself without purchasing any material. Generally, 3-4 workers can assemble 5-6 bodies everyday. Moreover, at the beginning we will assign our engineers to supply you some technical guidance.
Technology
Panel Thickness | Side Walls | Roof/Floor Panel | Front/rear walls |
General body | 82mm | 105mm/105mm | 82mm/82mm |
Ice cream body | 105mm | 125mm/125mm | 105mm/82mm |
MATERIAL OF THE BODY PANEL | Outside panels are claded with high quality fiberglass of more than 3mm.thick in one–Complete with whole panels after the Alkali Free Glassfibre heated and high-pressed, white color, food hygienic and vermin proof materials | ||||
MAIN MATERIAL | SURFACE LAYER OF PLASTIC RESIN CLOTHING, WATERPROOF :ASHLAND | ||||
Panel Producing layer order | |||||
ALKALI FREE GLASS FIBRE/无碱玻璃纤维 | |||||
UNSATURATED POLYESTERS RESINS: DIC BRAND FROM JAPAN/不饱和聚酯树脂 | |||||
COLOPHONY : ASHLAND BRAND FROM AMERICA/胶衣树脂 | |||||
PU : PUREN BRAND FROM CHINA & GERMANY JOINT VENTURE /聚氨酯(PU)泡沫 | |||||
BOND : HENKEL BRAND FROM GERMANY/粘合剂 德国汉高 | |||||
Producing Equipment And Technology | 1. Adopt the know-how and special equipments of Kogel Fahrzeugwerke AG to produce the sandwich panels of refrigerated & insulated truck with WET-IN-WET method and high pressure, vacuum workmanship. 2. The special press machine can meet various requirements of refrigerated & insulated bodies. The dimension of panel can be chosen at the follow range: Length 0-14750mm Width 0-3200mm Thickness 27-135mm 3. The insulated body is formed by applying polyurethane adhesive to the joint area of the all-closed sandwich panels, which ensures the joint reliability and optimum insulation. | ||||
BODY CONSTRUCTURE | The whole van body is made up of six panels:Floor plate, Front wall, Two Side wall, Roof and Rear wall portal. Self-supporting body, without cross bars inside and outside skin made of glass fiber reinforced polyester, reinforced with Z-straps. The core of hard foam with best insulation properties. Without metallic carrier elements = without direct heat conductivity. The bodies are watertight. The plastic elements are flame resistant. For galvanized door frame and G.P.R. panel. Due to absence of metal, excellent insulation value is obtained. (No heat conductivity). Thick wall door with 5 fold seal. Door lock with optimum contact pressure. |